Our Services
What We Offer
Comprehensive Electrical Services
From residential repairs to commercial installations and EV charging -- No Shorts Electric has you covered with licensed, insured, and warrantied electrical work.
Residential Electrical
Expert home electrical solutions from panel upgrades to full rewiring.
Dedicated circuits and GFCI protection for hot tub installations.
Keep your family safe with properly installed smoke and CO detectors.
Modern recessed lighting installation to brighten any space.
Never lose power again with a whole house standby generator.
Track down flickering lights, tripping breakers, or dead outlets and tell you exactly what's wrong.
Pool pump, heater, and lighting wiring — bonded, GFCI-protected, and inspector-approved.
Restore service after storm damage or wear with a fresh meter pan, riser, and weather-tight head.
Modernize a two-family home with two metered 200-amp services — one for each unit.
Heavy-duty 400-amp service for two-family homes running EV chargers, mini-splits, and modern loads.
New 50-amp circuit and stove receptacle wired from the panel for your range or dual-fuel oven.
Automatic transfer switch that flips your home onto generator power the moment the grid goes down.
Install a quiet, code-compliant exhaust fan to clear humidity and keep mildew out of the bathroom.
Safe takedown of the old fixture and clean install of your new chandelier — wiring, brace, and balance handled.
Add dimmer control to any room — works with LED, incandescent, and smart bulbs.
Dedicated 240V circuit and outlet wired for your gas or electric dryer.
Add GFCI protection to kitchens, baths, garages, and outdoor outlets to keep your family safe from shock.
Swap out tired porch, post, or wall lights with new fixtures, properly sealed against the weather.
Quick, clean fixture swaps for any room — chandeliers, pendants, flush mounts, and more.
Add a sub-panel to expand circuit capacity for additions, garages, or workshops.
Safely back-feed your house from a portable generator with a code-approved interlock kit.
Four-outlet box for media centers, home offices, or workshops where two receptacles aren't enough.
Standard residential service visit for diagnostics, small repairs, or a second opinion.
New switch wired in to control lights, fans, or outlets exactly where you need it.
Swap an old thermostat for a smart or programmable one — wired and tested with your HVAC system.
Replace a failing mechanical timer with a reliable digital or astronomical time switch.
Smart 3-way switch setup that controls one light from two locations — no extra traveler wire needed.
Swap a worn 240V outlet for a new 20-amp receptacle — safe for window AC units, tools, and shop equipment.
Replace and relocate your electric panel for safety, code compliance, or finished-basement plans.
Convert an existing 120V circuit to 240V for dryers, ovens, EV chargers, and other heavy appliances.
Replace a regular switch with a Wi-Fi smart switch — control lights from your phone or by voice.
Modern outlet with built-in USB-A and USB-C ports — charge phones and tablets without adapters.
Bright LED flood lights with motion sensors to light up the driveway, yard, or back door.
The Long Island standard for modern homes — 200 amps to handle heat pumps, EV chargers, and big appliances.
Full home electrical inspection — panel, grounding, outlets, and smoke detectors checked top to bottom.
Replace a worn or broken light switch with a new, properly grounded one.
Replace an outdated 100-amp panel with a modern breaker panel that safely powers today's appliances.
Step up to 320 amps for big homes, ADUs, multiple EV chargers, or heavy renovation loads.
Panel-mounted surge protection that defends every outlet, appliance, and device in your home.
Need Help Choosing the Right Service?
Not sure what you need? Call us and our team will help you find the right solution for your electrical project.
Call (516) 915-1234Commercial Electrical
Professional commercial electrical services for businesses of all sizes.
Preventive electrical maintenance programs for businesses.
Energy-efficient commercial lighting design and installation.
On-site diagnosis of tripped breakers, partial outages and flickering lights in offices, retail, restaurants and multi-family buildings.
Expand a single-gang box to two-gang to fit additional switches, outlets, or low-voltage devices.
Full electric service upgrade in NYC — Con Ed coordination, DOB filings, and final inspection handled.
Control the same lights from two or three locations — perfect for hallways, stairs, and large rooms.
Bright, energy-efficient 4-inch LED recessed cans for offices, retail, and hospitality spaces.
High-output 6-inch LED recessed lighting for warehouses, large rooms, and commercial ceilings.
Outdoor weatherproof disconnect for your rooftop or split-system AC, sized to the unit.
Installation and wiring of exhaust fans in commercial restrooms, tenant bathrooms and damp utility spaces across Nassau and Suffolk County.
Replace tripping or aging breakers with new, properly rated ones — same panel, no downtime.
New commercial ceiling fan wired and braced for high-traffic spaces.
Swap out worn ceiling fans without disturbing the ceiling — same brace, fresh fan.
Removal and installation of chandeliers and large decorative fixtures in lobbies, restaurants, banquet halls and building common areas.
Repair and properly enclose air splices to bring outdated wiring up to code.
Dedicated 20-amp circuit for sensitive equipment — POS systems, copiers, refrigeration, and more.
30-amp 240V dedicated line for HVAC, kilns, welders, and other heavy-duty equipment.
40-amp 240V circuit for high-load gear like commercial ranges and rooftop units.
Replace mechanical timers with reliable digital ones — programmable schedules and battery backup.
LED-compatible dimmer switches installed in offices, conference rooms, restaurants and retail spaces across Nassau and Suffolk County.
Safe removal of old wiring, fixtures, and panels during renovation, gut, or build-out projects.
We pull the electrical permit and shepherd your project through municipal inspection.
GFCI outlet installation for commercial kitchens, restrooms, exterior walls and wet-process areas in Nassau and Suffolk County businesses.
Replace a GFCI/switch combo device with a new code-compliant unit.
Swap a tripping or worn GFCI for a new one — same box, restored protection.
Dedicated circuits and GFCI protection for commercial hot tub and spa installations.
Wire and connect new electric or hybrid water heaters — sized to the load and to code.
Wire commercial jacuzzis with proper bonding, GFCI protection, and inspector-ready paperwork.
New interior and exterior fixtures wired in — recessed, pendant, track, or wall pack.
Replacement of failed single-pole, three-way, four-way and specialty wall switches in commercial buildings, scheduled around your business hours.
Replace wall packs, floodlights, entry sconces and parking-area fixtures on commercial buildings with new owner-supplied fixtures, installed to code.
Top-to-bottom electrical safety inspection of your commercial space — panels, grounding, and code review.
Systematic diagnostic work to find and document electrical faults in your commercial space.
Replace troffers, downlights, pendants and decorative fixtures in offices, retail and restaurant interiors with new owner-supplied fixtures.
Motion-activated LED flood lighting for parking lots, loading docks, rear entrances and building perimeters, installed by licensed electricians.
Main lug sub panel installation and replacement to add circuits for tenant fit-outs, new equipment and building expansions across Long Island.
Replace dim or failing emergency and exit lights to stay NFPA 101 compliant.
A licensed electrician dispatched to your office, store, restaurant or building to diagnose the problem and quote the fix before work begins.
EV Charger Installation
Level 2 EV charger installation for all makes and models.
Multi-unit EV charging solutions for commercial properties.
Certified Tesla Wall Connector installation by licensed electricians.
Tune-ups, breaker swaps, and firmware-related diagnostics for any home or commercial EV charger.
Standard 120V outlet install for trickle (Level 1) charging — works with the cable that came with your car.
Full 240V Level 2 home charger install — cuts charge time from overnight to a few hours.
Commercial DC fast-charging install — DC ports, transformer coordination, and utility paperwork handled.
Install or replace ChargePoint Home Flex and commercial chargers — networked and ready to roll.
ChargePoint and Tesla Wall Connector installs — sized to your panel and ready for fast home charging.
Install or replace ENLX (inCharge Energy) commercial EV chargers and pedestals.
Install or replace the NEMA 14-50 outlet — the industry-standard plug for portable EV chargers.
Diagnose why your EV charger trips, throttles, or won't power on — and fix it.
Mount and wire your EV wall charger — Tesla, ChargePoint, JuiceBox, and more.
Pull the electrical permit and coordinate the rough and final inspection for your EV charger.
Run a dedicated 240V circuit from your panel to the wall or post where your EV charger lives.
20-amp 240V circuit for low-load EV charging and trickle-charge scenarios.
30-amp 240V dedicated line — the workhorse circuit for most plug-in hybrids.
40-amp 240V circuit, the most common Level 2 EV charger spec.
50-amp 240V circuit and NEMA 14-50 outlet for Tesla Mobile Connectors and most home chargers.
60-amp 240V circuit for higher-amperage hardwired chargers like the Tesla Wall Connector.
70-amp 240V dedicated line for high-power charging or panels with extra capacity.
80-amp 240V — the maximum Level 2 spec for fastest possible home charging.
90-amp 240V dedicated line for commercial-grade Level 2 chargers and dual-vehicle setups.
100-amp 240V dedicated line for ultra-fast Level 2 charging or a future second EV.
Ready to Get Started?
Get a free, no-obligation estimate for any of our electrical services. We serve all of Nassau County and Suffolk County, Long Island.